Overview:
Clicker boards can be programmed using either the HID Bootloader or a stand-alone programmer. The programming process is explained in detail in the product user manual for each specific Clicker board. Below are the general steps and references to the relevant manuals for further guidance.
Programming Methods:
HID Bootloader
Clicker boards can be programmed using the HID Bootloader feature, which allows you to load firmware onto the board via USB without needing an external programmer.Stand-Alone Programmer
Alternatively, you can use a stand-alone programmer for programming the Clicker boards. This method involves connecting a compatible programmer/debugger (such as mikroProg) to the board for firmware uploading.
User Manual References:
For detailed, step-by-step instructions on how to program Clicker boards, refer to the relevant user manual for your Clicker model. The manuals provide specific details for using the HID Bootloader or stand-alone programmer for the programming process.
PIC Clicker Board User Manual – Page 10 contains instructions for programming the PIC Clicker board.
STM32 M4 Clicker User Manual – Page 10 contains instructions for programming the STM32 M4 Clicker board.
Conclusion:
To program your Clicker board, follow the instructions provided in the user manual for your specific board model. Whether you use the HID Bootloader or a stand-alone programmer, these manuals will guide you through the necessary steps to load firmware onto your Clicker board.